Datasheet

M16C/62P Group (M16C/62P, M16C/62PT) 2. Central Processing Unit (CPU)
Rev.2.41 Jan 10, 2006 Page 32 of 96
REJ03B0001-0241
2.8.8 Stack Pointer Select Flag (U Flag)
ISP is selected when the U flag is “0”; USP is selected when the U flag is “1”.
The U flag is cleared to “0” when a hardware interrupt request is accepted or an INT instruction for software
interrupt Nos. 0 to 31 is executed.
2.8.9 Processor Interrupt Priority Level (IPL)
IPL is configured with three bits, for specification of up to eight processor interrupt priority levels from level 0
to level 7.
If a requested interrupt has priority greater than IPL, the interrupt is enabled.
2.8.10 Reserved Area
When write to this bit, write “0”. When read, its content is indeterminate.