Datasheet

11. DMAC
puorG92/C61M
page 95
854fo7002,03.raM21.1.veR
2110-1010B90JER
Figure 11.4 SAR0, SAR1, DAR0, DAR1, TCR0, and TCR1 Registers
b7 b0 b7 b0
(b8)(b15)
Function
Set the transfer count minus 1. The written value is
stored in the DMAi transfer counter reload register,
and when the DMAE bit in the DMiCON register is
set to 1 (DMA enabled) or the DMAi transfer
counter underflows when the DMASL bit in the
DMiCON register is 1 (repeat transfer), the value
of the DMAi transfer counter reload register is
transferred to the DMAi transfer counter.
When read, the DMAi transfer counter is read
Symbol Address After Reset
TCR0 0029
16 , 0028 16 Undefined
TCR1 0039
16 , 0038 16 Undefined
DMAi Transfer Counter (i = 0, 1)
Setting Range
0000
16 to FFFF 16
b7
(b23)
b3 b0 b7 b0 b7 b0
(b8)(b16)(b15)(b19)
Function
RW
Set the source address of transfer
Symbol Address After Reset
SAR0 0022
16 to 0020 16 Undefined
SAR1 0032
16 to 0030 16 Undefined
DMAi Source Pointer (i = 0, 1)
(1)
Setting Range
00000
16 to FFFFF 16
Nothing is assigned. If necessary, set 0. When read, the contents
are 0
Symbol Address After Reset
DAR0 0026
16 to 0024 16 Undefined
DAR1 0036
16 to 0034 16 Undefined
b3 b0 b7 b0 b7 b0
(b8)(b15)(b16)(b19)
Function
Set the destination address of transfer
DMAi Destination Pointer (i = 0, 1)
(1)
Setting Range
00000
16 to FFFFF 16
b7
(b23)
RW
RW
RW
RW
RW
NOTE:
1. If the DSD bit in the DMiCON register is 0 (fixed), this register can only be written to when the DMAE bit in the
DMiCON register is set to 0 (DMA disabled).
If the DSD bit is set to 1 (forward direction), this register can be written to at any time.
If the DSD bit is set to 1 and the DMAE bit is set to 1 (DMA enabled), the DMAi forward address pointer can be
read from this register. Otherwise, the value written to it can be read.
Nothing is assigned. If necessary, set 0. When read, the contents
are 0
NOTE:
1. If the DAD bit in the DMiCON register is 0 (fixed), this register can only be written to when the DMAE bit in the
DMiCON register is set to 0 (DMA disabled).
If the DAD bit is set to 1 (forward direction), this register can be written to at any time.
If the DAD bit is set to 1 and the DMAE bit is set to 1 (DMA enabled), the DMAi forward address pointer can be
read from this register. Otherwise, the value written to it can be read.