Datasheet

M16C/2
6
Programming Flash Memory via Flash-Over-USB™
REU05B0042-0100Z June 2003
Page 7 of 8
4. Click on Program of the Program Flash GUI. The loading of target program into MCU flash will start at this
point and the progress of flash programming will be shown dynamically by a moving bar located at the lower
part of this dialog box. After a successful programming of the flash, a Program Completed Successfully
dialog box will appear as shown in Figure 11.
5. Click on OK button and the dialog box disappear (nd back to the FoUSB main GUI).
Figure 10 Menu options for programming flash
Figure 11 Dialog box after a successful flash programming