Datasheet

M16C/2
6
Programming Flash Memory via Flash-Over-USB™
REU05B0042-0100Z June 2003
Page 6 of 8
Figure 8 Dialog box for file selection
Figure 9 FoUSB main GUI after file selection
4.4 Loading Target Program
To load the selected target program into the MCU flash, perform the following steps:
1. Click on PROGRAM on FoUSB main GUI. The Program Flash dialog box appears as shown in Figure 10.
2. Select Erase->Program->Verify option (the default option) from Choose an Operation.
3. Select Erase All Block option from Erasing Options.