Datasheet

M16C/2
6
Programming Flash Memory via Flash-Over-USB™
REU05B0042-0100Z June 2003
Page 4 of 8
4.1 Starting FoUSB
Connect a USB-Monitor to the M16C/26 target board and then connect the USB cable to the PC as shown in
Figure 4. To start FoUSB, double-click on 'fousb' icon on your desktop or select Flash-over-USB from the Start
menu (Start > Programs > Renesas-Tools > Flash-over-USB ver. 1.xx > Flash-over-USB). A connection dialog
box will appear as shown in Figure 5. Click OK and the main GUI of the FoUSB program will appear as shown in
Figure 6. USB Monitor Device appears on the FoUSB main GUI indicating that the USB monitor has been
properly connected.
Figure 5 USB Monitor connection dialog box
Figure 6 FoUSB main GUI