User System Interface Board User's Manual
Table Of Contents
- Cover
- Cautions
- IMPORTANT INFORMATION
- SAFETY PAGE
- Preface
- Contents
- Section 1 Configuration
- Section 2 Environmental Conditions
- Section 3 Product Specifications
- Section 4 User Interface Specifications
- Section 5 Connection Procedures
- 5.1 Connecting User System Interface Board to User System
- 5.2 Connecting User System Interface Board to EV-Chip Board
- 5.3 Recommended Dimensions for User System Mount Pad (Footprint)
- 5.4 Dimensions for EV-Chip Board and User System Interface Board
- 5.5 Resulting Dimensions after Connecting User System Interface Board
- Section 6 Installing the MCU to the User System
- Section 7 Verifying Operation
- Section 8 Notice
- Colophon
2
CAUTION
Use a NQPACK144SD socket (manufactured by Tokyo
Eletech Corporation) for the FP-144F package IC socket on
the user system.
Table 1 HS7145ECH61H Components
No. Component Quantity Remarks
1 Board 1
With two spacers (2.6MP x 6 mm)
2 IC socket 1 For the FP-144F package (to be mounted on the
user system)
3 Socket cover 1 For the FP-144F package (for installing MCU)
4 Screws (M2.0 x 10 mm) 4 For fastening board
5 Screws (M2.0 x 6 mm) 4 For installing an FP-144F-packaged MCU
6
Guide pins
3
7 Screwdriver 1
8 User’s manual 1 User’s manual for HS7145ECH61H (this manual)