Technical information

44
Display Block usage…
Launches the ‘S-Record Properties’ dialog box and displays the Block usage tab.
Exclude ‘filename’
If a file is excluded, it will not be used to form the built image if Rebuild Image is selected. Once selected as
excluded, using the right mouse click, it is possible to “Include ‘filename’”.
Download File
Downloads the active file to the device FLASH memory.
File Checksum
The file checksum returns the checksum for the file using the algorithm in the kernel (EPROM style) and as a
basic checksum. The result is shown in the output window. An example is shown below:-
File Checksum: 0x07F5A651 (EPROM style), Raw Checksum: 0x07F5A651
(over address range 0x00000000 - 0x0007FFFF)
Compare File->Device Checksum
This command allows the user to swiftly check the contents of the device memory with the file. The output
window will show the sum check for both the file and the device. The user may then confirm that they are the
same.
An example is shown below:-
Calculating device checksum
Flash Checksum: 0x07F5A651 (User Area)
File Checksum: 0x07F5A651 (EPROM style), Raw Checksum: 0x07F5A651
(over address range 0x00000000 - 0x0007FFFF)
6.6 Workspace Properties
Invoked from the Workspace pop-up menu item P
roperties.
The ‘Workspace Properties’ dialog box shows details of:
• the Workspace Name
• its filename and path
• the time and date when the workspace was last saved