Technical information

(4) Enter the numerical values for the input clock, select the main or peripheral multiplier from the drop-

down list, and click the ‘Next’ button.

Figure 3-8 Device Settings

Supplementary:

1. CPU Crystal Frequency

Enter the frequency of the CPU clock or the crystal generator as integers or in a format such as xx.xx. You

can only input two digits to the right of the decimal point.

2. Clock Mode

A clock mode needs to be selected depending on the target device. Select a value from the drop-down list.

3. Multiplier for CKM

Select the multiplier of the system clock (master clock) for the input clock.

4. Multiplier for CKP

The frequency rate (CKP) selected depends on the target device. Enter the multiplier of the peripheral clock

for the input clock.

Note To enter the clock mode, input clock, and frequency rate, refer to the hardware manual and confirm the

range to be set.