Technical information

14
(2) Select the device you wish to use from the drop-down list. If there exists a user-created kernel in
addition to the default path, select ‘Other…’ to specify the kernel file (.fcf).
It is possible to have more than one kernel option displayed, and double clicking on a kernel will open
an optional “readme.txt” file that has information about the kernel (such as the device, version number
and the compilers it was created with).
Figure 3-3 Device and Kernel Selection
(3) Select a port from the drop-down lists, then click the ‘Next’ button. In addition to the serial ports,
there is also an option to use USB. Note that the USB Flash Development Module interface board
(FDM) will appear above ‘COM1’ in the list of ports. If the target is connected directly to the host
computer, the connection interface should be selected to ‘Direct Connection’.