User`s manual

151
5.11 RTOS Extension Function
5.11.1 Input Values for the [TASK ID writing area] Input Edit Box
Specify the address to which the task IDs are written. Set an integer multiple of eight within the on-chip I/O area
that does not contain I/O registers. The address ranges for the on-chip I/O area are H’00FFEA00 to H’00FFFE00
and H’00FFFF20 to H’00FFFFFC.
Table 5.6 shows examples of input values for the [TASK ID writing area] input edit box for particular debugging
platforms.
Table 5.6 Examples of Input Values for the [TASK ID writing area] Input Edit Box
Debugging Platform
Example of Input Value for the [TASK ID
writing area] Input Edit Box
H8SX/1650 E6000H Emulator CPU 1600 H’00FFFBE8
H8SX/1653 E6000H Emulator CPU 1600 H’00FFFBE8
H8SX/1663 E6000H Emulator CPU 1600 H’00FFFBE8
H8SX/1527 E6000H Emulator CPU 1600 H’00FFFBE8
H8SX/1527R E6000H Emulator CPU 1600 H’00FFFBE8
H8SX/1544 E6000H Emulator CPU 1600 H’00FFFBE8
5.11.2 Debugging Area for the E6000H Emulator
For the debugging area for the E6000H emulator, refer to section 5, Configuration, in the HI1000/4 User’s
Manual.
5.11.3 Note on Using the HI1000/4 Debugging Extension
When using the HI1000/4 debugging extension, select [Don’t Care] under [RTOS Support Function] in the
[RTOS Support Function Configuration Properties] dialog box to disable the RTOS extension function.