User`s manual

142
5.3 Memory Map
• Some emulators may not support the memory mapping function.
• Attributes of a memory map can be defined in units of blocks as shown in figure 5.1.
• No_access Area may not be selectable as an attribute of a memory map depending on the emulator in use.
• No memory exists when No_access Area is selected, even though it is defined as an internal memory area.
• No_access Area is not selectable when the attribute of the address range selected in the [Memory Mapping]
dialog box is On Chip or User.
• The minimum unit for memory mapping is one block (1 Mbyte).
LB0 (512 kbytes)
H'x00_0000
H'x10_0000
H'x18_0000
H'x20_0000
H'x30_0000
H'x40_0000
H'x80_0000
H'xC0_0000
H'xD0_0000
H'xE0_0000
H'xE8_0000
H'xF0_0000
H'xF8_0000
H'xFF_E000
H'xFF_F000
H'xFF_FF00
H'xFF_FF80
H'xFF_FFFF
H'x00_0000
H'x01_0000
H'x02_0000
H'x03_0000
H'x04_0000
H'x05_0000
H'x06_0000
H'x07_0000
H'x08_0000
H'x09_0000
H'x0A_0000
H'x0B_0000
H'x0C_0000
H'x0D_E000
H'x0E_F000
H'x0F_FF00
H'x0F_FFFF
SB0 (64 kbytes)
SB1 (64 kbytes)
SB2 (64 kbytes)
SB3 (64 kbytes)
SB4 (64 kbytes)
SB5 (64 kbytes)
SB6 (64 kbytes)
SB7 (64 kbytes)
SB8 (64 kbytes)
SB9 (64 kbytes)
SB10 (64 kbytes)
SB11 (64 kbytes)
SB12 (64 kbytes)
SB13 (64 kbytes)
SB14 (64 kbytes)
SB15 (64 kbytes)
LB1 (512 kbytes)
LB2 (1 Mbyte)
LB3 (1 Mbyte)
LB4 (4 Mbytes)
LB5 (4 Mbytes)
LB6 (1 Mbyte)
LB7 (1 Mbyte)
LB8 (512 kbytes)
LB9 (512 kbytes)
LB10 (512 kbytes)
LB11 (504 kbytes)
LB12 (4 kbytes)
(256 bytes to 4 kbytes)
LB14 (128 bytes)
LB15 (128 bytes)
LB: Large block
SB: Small block
LB13
Figure 5.1 Blocks Divided in 16-Mbyte Mode