User`s manual

5
1.2.2 Evaluation Chip Board Configuration
The names of the components on the evaluation chip board of the emulator are listed below.
Figure 1.4 Evaluation Chip Board
(a) Station to evaluation chip board This is a cover for protecting the connector that connects
interface connector cover: the E6000H station to the evaluation chip board.
(b) Crystal oscillator terminals: For installing a crystal oscillator to be used as
an external clock source for the MCU.
(c) HS1650PWB20H board: Connector to the trace cable is attached.
(d) HS1650PWB30H board: An evaluation chip is installed and a dedicated connector
to the user system interface board or user system is attached.
(e) User system interface board For connecting the user system interface board or
connector: user system.
Note: (a) to (e) listed above are referred to as evaluation chip board.