User`s manual

122
4.17.4 Statistics
The number of times the on-chip RAM has been written to can be included in the acquired trace information.
(1) Delete all the break conditions that have been set. Click [Reset All] on the [Condition] page of the [Trace
Acquisition Properties] dialog box to cancel trace conditions. Check [Free Trace] on the [Condition] page
of the [Trace Acquisition Properties] dialog box.
(2) Make the setting so that a break occurs at the address on the line that has ‘p_sam->s0=a[0];’ within the
tutorial function (H’0000106E in this example) (for details on, refer to section 4.16.1, Software
Break Function).
(3) Select [Reset Go] from the [Debug] menu. Execution stops when the break condition is satisfied, and the
[Trace] window then displays the trace information.
(4) Select [Statistic…] from the popup menu that is displayed when you click the right-hand mouse button on
the [Trace] window. A message box appears, indicating that the trace data is being loaded, and the
[Statistic] dialog box will be displayed.
Figure 4.48 [Statistic] Dialog Box