User`s manual

3.12.3 Functions Made Available by [TASK Selection]

(1) Display of the [TASK Selection] Settings

Figure 3.47 [Status] Window

[Platform] sheet: Includes information on the emulation environment, such as the CPU type

and operating mode.

[Selection TASK ID]: Displays the values set for [TASK Selection 1] to [TASK

Selection 3] in the [RTOS Support Function Configuration

Properties] dialog box.

(2) Display of Trace Information ([Trace] Window)

The [TASK] is added to the items for display.

[TASK]: When a task selected in [TASK Selection 1] to [TASK Selection 3] of the

[RTOS Support Function Configuration Properties] dialog box is being

executed, its ID is displayed here. When the task ID is 0, [OS] is displayed

here. During the execution of task IDs other than those specified for [TASK

Selection 1] to [TASK Selection 3], [OTHER] is displayed here.

(3) Trace Information Acquisition Condition ([Trace Acquisition Condition Channel n] Dialog Box)

When [TASK Selection] has been set up, the condition settings change in the following ways.

[Address] page in the [Trace Acquisition Condition Channel n] dialog box:

[Address]: Sets the address-bus condition.

[Outside Range]: [Outside Range] is disabled.

[TASK ID]: [TASK ID] is added to the [Address] page. The [TASK

Selection 1] to [TASK Selection 3] settings in the [RTOS

Support Function Configuration Properties] dialog box are

selectable as conditions. To set values other than those

specified in [RTOS Support Function Configuration Properties]

as a condition, select [OTHER] here.