User`s manual

Set filtering conditions and then press the [OK] button. This starts filtering according to the conditions. Clicking

the [Cancel] button closes the [Trace Filter] dialog box, which holds the settings at the time when the dialog box

was opened.

In filtering, only the trace information that satisfies one or more filtering conditions set in the above pages will

be displayed in the [Trace] window.

Filtering conditions can be changed several times to analyze data because the content of the trace buffer is not

changed by filtering.

3.8.12 Calculating the Difference in Time Stamping

Select [Timestamp Difference…] from the popup menu to calculate the time difference between the two points

selected by the result of tracing in acquisition of time stamp information.

Figure 3.32 [Timestamp Difference] Dialog Box

[Select 2 line]: Select trace records to calculate the time stamp difference.

[First PTR]: Specifies the first pointer to measure the difference. The pointer of the line

selected on the [Trace] window is displayed by default.

[Second PTR]: Specifies the second pointer to measure the difference.

[Timestamp Difference]: Displays the results of calculation.

[Get Difference]: Calculates the difference between the specified two points and display its result in the

[Timestamp Difference] list.

[Clear]: Clears all the results in the [Timestamp Difference] list.

[OK]: Closes the dialog box. All the results in the [Timestamp Difference] list are cleared.