User`s manual

[R/W]: Whether access was read (RD) or write (WR)

[SZ]: Selects the size of an access as B (byte), W (word), or L (longword).

[Status]: Bus status during this cycle; DTC operation, PROG (prefetch), Data (CPU data access

cycle), DMAC (DMAC cycle), or STACK (STACK cycle).

[Area]: Memory area being accessed; ROM (on-chip ROM), RAM (on-chip RAM), I/O (on-

chip I/O), 8- 16-, or 32-bit EXT (external), or 8- 16-, or 32-bit EMU (emulation

memory).

[Probes]: A 4-bit binary number showing the four probe pins in the order of Probe 4, Probe 3,

Probe 2, and Probe 1 from the left.

[IRQ]: Status of IRQ inputs

[Timestamp]: Time stamp of the record. Time stamps start from zero each time the user program is

executed. The minimum unit used in time measurement depends on the time stamp

clock rate selected in the [Trace Acquisition] dialog box.

[Timestamp-Difference] Difference from the timestamp value shown on the previous line

[Source]: Source program of the executed instruction address

[Label]: Label information of the address (if defined)

It is possible to hide any column not necessary in the [Trace] window. Selecting a column you want to hide from

the popup menu displayed by clicking the right-hand mouse button on the header column hides that column. To

display the hidden column, select the column from the said popup menu again.