User`s manual

35
Notes: 1. This function can be set per variable or per element or body for structures of data.
2. The color of an [R] in the [Name] column changes according to the monitoring settings.
3. A variable that is allocated to a register cannot be selected for monitoring.
4. The procedure to display or modify the contents of memory differs depending on the product. If the
display of memory contents is updated during execution of the user program, realtime emulation
may not be available. For details, refer to section 5.4, Displaying and Modifying the Contents of
Memory.
5. The H8SX/1527 E6000H, H8SX/1527R E6000H and H8SX/1544 E6000H emulators incorporate a
dedicated on-chip RAM monitor of 256 bytes × 12 points for the watch function that only allows the
contents of the on-chip RAM to be displayed in realtime. Enabling Auto Update after registering
variables automatically allows use of this on-chip RAM monitor, while disabling Auto Update or
deleting variables cancels use of the on-chip RAM monitor. When Auto Update is enabled while all
of the 12 points of this on-chip RAM monitor are in use, the values will be updated by reading data
as usual. To display the contents of memory other than the on-chip RAM in realtime, use the normal
monitor.