User`s manual

6
1.3 System Configuration
The emulator must be connected to a host computer via the selected PC interface board (PCI bus or PC card bus),
LAN adapter, or USB adapter. For details on the PC interface boards (available for PCI bus and PC card bus
specifications), the LAN adapter, and the USB adapter, refer to the relevant descriptive documents.
1.3.1 System Configuration Using Various Interfaces
(1) PC Interface Board
Figure 1.5 shows the configuration of a system in which the PC interface board is used. The emulator can be
connected to a host computer via a PC interface board (option: PCI bus or PC card bus). Install the PC interface
board to the expansion slot for the interface board in the host computer, and connect the interface cable supplied
with the PC interface board to the emulator.
E6000H
emulator
PCIF
Host computer
PC interface board
PC interface cable
Install the PC interface board to the
expansion slot for the PC interface board
in the host computer.
Figure 1.5 System Configuration Using a PC Interface Board
(2) LAN Adapter
Figure 1.6 shows the configuration of a system in which the LAN adapter is used. A LAN adapter can be used to
connect the emulator to a host computer as a network.
E6000H
emulator
PCIF
Host computer
PC interface cable
LAN adapter
Network
Figure 1.6 System Configuration Using a LAN Adapter