User`s manual

QDK™

Renesas RX with HEW

state-machine.com/rx

2.4 Building the Examples

The examples accompanying this QDK-RX-Renesas are based on the DPP application (see Quantum

Leaps Application Note: “Dining Philosophers Problem Application” [QL AN-DPP 08] included in this

QDK). The example directory

qpc\examples\rx\

contains the HEW workspaces and project that you

can load into the HEW IDE, as shown in Figure 6.

Figure 6: HEW IDE with the DPP example project

For example, to build the DPP example for the cooperative Vanilla kernel perform the following steps:

 Launch HEW and open the workspace

dpp_yrdkrx62n.hws

(located in

qpc\examples\rx\

vanilla\renesas\dpp-yrdkrx62n\

)

 Build the project by select Buld | Build menu or by pressing F7. The project file contains three build

configurations Debug, Release, and Spy. You can select the build configuration by means of the

drop-down list on the HEW toolbar, as shown in Figure 6.

10 of 32

Select build

configuration

Select debugger

session