User`s manual

QDK™

Renesas RX with HEW

state-machine.com/rx

2.2 Setting up HEW Placeholders

The HEW project files included in this QDK assume that custom HEW “Placeholders” are set up to point

to the location of the QP frameworks in your file system. Therefore it is strongly recommended that you

define the custom placeholders for QP globally for all applications. To define HEW placeholders, you

launch HEW and select the menu Setup | Customize... menu (see Figure 4). Next, in the “Customize”

dialog box, you click the “Placeholder” tab and add the placeholders for all installed QP framework types.

The placeholder names needed for the provided HEW projects are as follows:

QPC

for QP/C,

QPCPP

for

QP/C++, and QPN for QP-nano, respectively.

Figure 4: Setting “Application wide” Placeholders the HEW IDE

2.3 Building the QP™ Libraries

All QP components are deployed as libraries that you statically link to your application. The pre-built QP

libraries are provided inside the

<qp>\ports\rx\

directory, so you don't need to build the QP libraries if

you use the same toolset and the standard QP configuration. This section describes steps you need to

take to rebuild the libraries yourself.

NOTE: The QP libraries and QP applications can be built in the following three build configurations:

8 of 32