Datasheet

694
• Bit 3—Erase-Verify 2 (EV2): Selects erase-verify mode transition or release (applicable
addresses: H'20000–H'3FFFF). Do not set the ESU2, PSU2, PV2, E2, or P2 bit at the same
time.
Bit 3: EV2 Description
0 Erase verify mode release (Initial value)
1 Transition to the erase verify mode
[Setting condition] When FWE=1 and SWE=1
• Bit 2—Program-Verify 2 (PV2): Selects program-verify mode transition or release (applicable
addresses: H'20000–H'3FFFF). Do not set the ESU2, PSU2, EV2, E2, or P2 bit at the same
time.
Bit 2: PV2 Description
0 Program verify mode release (Initial value)
1 Transition to the program verify mode
[Setting condition] When FWE=1, and SWE=1
• Bit 1—Erase 2 (E2): Selects erase mode transition or release (applicable addresses: H'20000–
H'3FFFF). Do not set the ESU2, PSU2, EV2, PV2, or P2 bit at the same time.
Bit 1: E2 Description
0 Erase mode release (Initial value)
1 Transition to the erase mode
[Setting condition] When FWE=1, SWE=1, and ESU2=1
• Bit 0—Program 2 (P2): Selects program mode transition or release (applicable addresses:
H'20000–H'3FFFF). Do not set the ESU2, PSU2, EV2, PV2, or E2 bit at the same time.
Bit 0: P2 Description
0 Program mode release(Initial value)
1 Transition to the program mode
[Setting condition] When FWE=1, SWE=1, and PSU2=1