Datasheet

691
Bit 5: ESU1 Description
0 Erase setup release (Initial value)
1 Erase setup
[Setting condition] When FWE=1 and SWE=1
• Bit 4—Program Setup Bit 1 (PSU1): Prepares for a transition to program mode (applicable
addresses: H'00000–H'1FFFFF). Do not set the SWE, ESU1, EV1, PV1, E1, or P1 bit at the
same time.
Bit 4: PSU1 Description
0 Program setup release (Initial value)
1 Program setup
[Setting condition] When FWE=1 and SWE=1
• Bit 3—Erase-Verify 1 (EV1): Selects erase-verify mode transition or release (applicable
addresses: H'00000–H'1FFFF). Do not set the SWE, ESU1, PSU1, PV1, E1, or P1 bit at the
same time.
Bit 3: EV1 Description
0 Erase verify mode release (Initial value)
1 Transition to erase verify mode
[Setting condition] When FWE=1 and SWE=1
• Bit 2—Program-Verify 1 (PV1): Selects program-verify mode transition or release (applicable
addresses: H'00000–H'1FFFF). Do not set the SWE, ESU1, PSU1, EV1, E1, or P1 bit at the
same time.
Bit 2: PV1 Description
0 Program verify mode release (Initial value)
1 Transition to program verify mode
[Setting condition] When FWE=1 and SWE=1