Datasheet

687
• User Program Mode
SCI
RAM
Flash memory
Application program
Programming data
Programming control
program execution state
Overlap RAM
(Programming data)
Figure 22.6 Programming to the Flash Memory
22.2.5 Differences between Boot Mode and User Program Mode
Table 22.1 Differences between Boot Mode and User Program Mode
Boot Mode User Program Mode
Total erase Yes Yes
Block erase No Yes
Programming control program
*
(2) (1) (2) (3)
(1) Erase/erase-verify
(2) Program/program-verify
(3) Emulation
Note: * To be prepared by the user according to the recommended algorithm.