Datasheet

643
• Bits 5 and 4—PE2 Mode 1, 0 (PE2MD1 and PE2MD0): These bits select the function of the
PE2/TIOC0C/DREQ1 pin.
Bit 5:
PE2MD1
Bit 4:
PE2MD0 Description
0 0 General input/output (PE2) (initial value)
1 MTU input capture input/output compare output (TIOC0C)
10DREQ1 request receive input (PE2 in single chip mode)
1 Reserved
• Bits 3 and 2—PE1 Mode 1, 0 (PE1MD1 and PE1MD0): These bits select the function of the
PE1/TIOC0B/DRAK0 pin.
Bit 3:
PE1MD1
Bit 2:
PE1MD0 Description
0 0 General input/output (PE1) (initial value)
1 MTU input capture input/output compare output (TIOC0B)
10DREQ0 request received output (DRAK0) (PE1 in single chip
mode)
1 Reserved
• Bits 1 and 0—PE0 Mode 1, 0 (PE0MD1 and PE0MD0): These bits select the function of the
PE0/TIOC0A/DREQ0 pin.
Bit 1:
PE0MD1
Bit 0:
PE0MD0 Description
0 0 General input/output (PE0) (initial value)
1 MTU input capture input/output compare output (TIOC0A)
10DREQ0 request receive input (PE0 in single chip mode)
1 Reserved
18.3.15 IRQOUT Function Control Register (IFCR)
The IFCR is a 16-bit read/write register used to control output when the multiplexed pins are
established as IRQOUT outputs by the port D control register (PDCRH1) or port E control register
(PECR1). When PDCRH1 or PECR1 are set for any other function, the settings of this register
have no effect on the pin functions.