Datasheet

642
• Bit 12—PE6 Mode (PE6MD): Selects the function of the PE6/TIOC2A pin.
Bit 12: PE6MD Description
0 General input/output (PE6) (initial value)
1 MTU input capture input/output compare output (TIOC2A)
• Bit 11—Reserved: This bit always reads as 0. The write value should always be 0.
• Bit 10—PE5 Mode (PE5MD): Selects the function of the PE5/TIOC1B pin.
Bit 10: PE5MD Description
0 General input/output (PE5) (initial value)
1 MTU input capture input/output compare output (TIOC1B)
• Bit 9—Reserved: This bit always reads as 0. The write value should always be 0.
• Bit 8—PE4 Mode (PE4MD): Selects the function of the PE4/TIOC1A pin.
Bit 8: PE4MD Description
0 General input/output (PE4) (initial value)
1 MTU input capture input/output compare output (TIOC1A)
• Bits 7 and 6—PE3 Mode 1, 0 (PE3MD1 and PE3MD0): These bits select the function of the
PE3/TIOC0D/DRAK1 pin.
Bit 7:
PE3MD1
Bit 6:
PE3MD0 Description
0 0 General input/output (PE3) (initial value)
1 MTU input capture input/output compare output (TIOC0D)
10DREQ1 request received output (DRAK1) (PE3 in single chip
mode)
1 Reserved