Datasheet

Section 3 Exception Handling
Rev.5.00 Nov. 02, 2005 Page 55 of 500
REJ09B0027-0500
3.2.6 Interrupt Flag Register 2 (IRR2)
IRR2 is a status flag register for timer B1 overflow interrupts.
Bit Bit Name
Initial
Value R/W Description
7, 6  All 0  Reserved
These bits are always read as 0.
5 IRRTB1 0 R/W Timer B1 Interrupt Request flag
[Setting condition]
When the timer B1 counter value overflows
[Clearing condition]
When IRRTB1 is cleared by writing 0
4 to 0  All 1  Reserved
These bits are always read as 1.
3.2.7 Wakeup Interrupt Flag Register (IWPR)
IWPR is a status flag register for WKP5 to WKP0 interrupt requests.
Bit Bit Name
Initial
Value R/W Description
7, 6  All 1  Reserved
These bits are always read as 1.
5 IWPF5 0 R/W WKP5 Interrupt Request Flag
[Setting condition]
When WKP5 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF5 is cleared by writing 0.
4 IWPF4 0 R/W WKP4 Interrupt Request Flag
[Setting condition]
When WKP4 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF4 is cleared by writing 0.