Datasheet

Section 17 I
2
C Bus Interface 2 (IIC2)
Rev.5.00 Nov. 02, 2005 Page 316 of 500
REJ09B0027-0500
Bit Bit Name
Initial
Value R/W Description
0 ADZ 0 R/W General Call Address Recognition Flag
This bit is valid in I
2
C bus format slave receive mode.
[Setting condition]
• When the general call address is detected in slave
receive mode
[Clearing condition]
• When 0 is written in ADZ after reading ADZ=1
17.3.6 Slave Address Register (SAR)
SAR selects the communication format and sets the slave address. When the chip is in slave mode
with the I
2
C bus format, if the upper 7 bits of SAR match the upper 7 bits of the first frame
received after a start condition, the chip operates as the slave device.
Bit Bit Name
Initial
Value R/W Description
7 to 1 SVA6 to
SVA0
All 0 R/W Slave Address 6 to 0
These bits set a unique address in bits SVA6 to SVA0,
differing form the addresses of other slave devices
connected to the I
2
C bus.
0 FS 0 R/W Format Select
0: I
2
C bus format is selected.
1: Clocked synchronous serial format is selected.