Datasheet

Section 18 Power Supply Circuit
Rev. 6.00 Mar. 24, 2006 Page 300 of 412
REJ09B0142-0600
18.2 When Not Using Internal Power Supply Step-Down Circuit
When the internal power supply step-down circuit is not used, connect the external power supply
to the V
CL
pin and V
CC
pin, as shown in figure 18.2. The external power supply is then input directly
to the internal power supply. The permissible range for the power supply voltage is 3.0 V to 3.6 V.
Operation cannot be guaranteed if a voltage outside this range (less than 3.0 V or more than 3.6 V)
is input.
V
CL
V
SS
Internal
logic
Step-down circuit
Internal
power
supply
V
CC
V
CC
= 3.0 to 3.6 V
Figure 18.2 Power Supply Connection when Internal Step-Down Circuit is Not Used