Datasheet

Section 14 Serial Communication Interface 3 (SCI3)
Rev. 6.00 Mar. 24, 2006 Page 203 of 412
REJ09B0142-0600
14.3.7 Serial Status Register (SSR)
SSR is a register containing status flags of the SCI3 and multiprocessor bits for transfer. 1 cannot
be written to flags TDRE, RDRF, OER, PER, and FER; they can only be cleared.
Bit Bit Name
Initial
Value R/W Description
7 TDRE 1 R/W Transmit Data Register Empty
Displays whether TDR contains transmit data.
[Setting conditions]
• When the TE bit in SCR3 is 0
• When data is transferred from TDR to TSR
[Clearing conditions]
• When 0 is written to TDRE after reading TDRE = 1
• When the transmit data is written to TDR
6 RDRF 0 R/W Receive Data Register Full
Indicates that the received data is stored in RDR.
[Setting condition]
When serial reception ends normally and receive data
is transferred from RSR to RDR
[Clearing conditions]
• When 0 is written to RDRF after reading RDRF =
1
• When data is read from RDR
5 OER 0 R/W Overrun Error
[Setting condition]
When an overrun error occurs in reception
[Clearing condition]
When 0 is written to OER after reading OER = 1
4 FER 0 R/W Framing Error
[Setting condition]
When a framing error occurs in reception
[Clearing condition]
When 0 is written to FER after reading FER = 1