Datasheet

Section 11 Timer V
Rev. 6.00 Mar. 24, 2006 Page 149 of 412
REJ09B0142-0600
Bit Bit Name
Initial
Value R/W Description
4
3
CCLR1
CCLR0
0
0
R/W
R/W
Counter Clear 1 and 0
These bits specify the clearing conditions of TCNTV.
00: Clearing is disabled
01: Cleared by compare match A
10: Cleared by compare match B
11: Cleared on the rising edge of the TMRIV pin. The
operation of TCNTV after clearing depends on
TRGE in TCRV1.
2
1
0
CKS2
CKS1
CKS0
0
0
0
R/W
R/W
R/W
Clock Select 2 to 0
These bits select clock signals to input to TCNTV and
the counting condition in combination with ICKS0 in
TCRV1.
Refer to table 11.2.
Table 11.2 Clock Signals to Input to TCNTV and Counting Conditions
TCRV0 TCRV1
Bit 2 Bit 1 Bit 0 Bit 0
CKS2 CKS1 CKS0 ICKS0 Description
0 0 0  Clock input prohibited
1 0 Internal clock: counts on φ/4, falling edge
1 Internal clock: counts on φ/8, falling edge
1 0 0 Internal clock: counts on φ/16, falling edge
1 Internal clock: counts on φ/32, falling edge
1 0 Internal clock: counts on φ/64, falling edge
1 Internal clock: counts on φ/128, falling edge
1 0 0  Clock input prohibited
1  External clock: counts on rising edge
1 0  External clock: counts on falling edge
1  External clock: counts on rising and falling
edge