Datasheet

Section 6 Power-Down Modes
Rev. 6.00 Mar. 24, 2006 Page 89 of 412
REJ09B0142-0600
Table 6.2 Transition Mode after SLEEP Instruction Execution and Interrupt Handling
DTON SSBY SMSEL LSON
Transition Mode after
SLEEP Instruction
Execution
Transition Mode due
to Interrupt
0 0 0 0 Sleep mode Active mode
1 Subactive mode
1 0 Subsleep mode Active mode
1 Subactive mode
1 X X Standby mode Active mode
1 X 0* 0 Active mode (direct
transition)
—
X X 1 Subactive mode (direct
transition)
—
[Legend]
X: Don't care.
Note: * When a state transition is performed while SMSEL is 1, timer V, SCI3, and the A/D
converter are reset, and all registers are set to their initial values. To use these
functions after entering active mode, reset the registers.