Specifications

H8SX Family Emulator E6000H
Usage of Realtime RAM Monitoring
4.8 Checking the Monitor Display
(1) During user program execution, depending on the program, when the display of the [Monitor] window is
updated after data has been written within the target address range, the display of memory contents will be
changed.
Address bus and status signals
Update interval (ms)
The display of memory
contens will be changed.
The update interval is displayed in the ms unit on the title position of the [Address] column in the [Monitor] window.
The value of the update interval is based on the interval value specified for the auto-update interval (refer to the
description on the [Monitor Setting] dialog box in section 4.6, Setting a Monitor Condition). Actually, the update
timing will be late because of an overhead of the processing.
The execution states of address bus and status signals are displayed in realtime at the lower left of the status bar.
In addition, it is possible to customize the [Color] group box or [Access] combo box.
For details on the displayed contents and the operation of the [Monitor] window, refer to the H8SX E6000H Emulator
User's Manual that is listed in section 5, Related Documents.
To halt the user program, press the [Esc] key.
REJ06J0024-0100/Rev.1.00 July 2007 Page 20 of 23