Technical information

4 / 4
∙
Address space size
In absolute addressing mode, specify the size (:16, etc.)
1.24 Command Line Interface
∙
Batch file
To display the message “Not currently available” while executing a batch file, enter the sleep command.
Adjust the sleep time length which differs according to the operating environment.
Example: To display “Not currently available” during memory_fill execution:
sleep d’3000
memory_fill 0 ffff 0
∙
Overwrite file
In Command Line Interface, a file having the same name as the output file is overwritten without asking the
user.
1.25 Usage with Another HDI
∙
Automatic load of session files
Since the emulator cannot use another HDI, re-install this HDI whenever another HDI has been previously
installed is used.
If another HDI has been used, initiate this HDI with "Run" as follows without using the session files.
<Directory path name in which HDI is installed>\hdi /n (RET)
/n initiates the HDI without loading the recently used session files.
If there is another session file in the different debug platform, the following error message is displayed:
invalid target system: <recently used debug platform name>
∙
Uninstallation of Another HDI
When another HDI is uninstalled after installing this HDI, the bus monitor function and the stack trace
function cannot be used. To use this function, re-install this HDI.
1.26
Limitations when Using Old Version of Windows



95
When using the old released version (4.00.950a, etc.) of Windows

95, an illegal operation may occur; for
example, the HDI is abnormally terminated by an application error if [Options…] is selected from the
[Setup] menu. This is because of the old version of COMCTL32.DLL in the System directory in the
Windows directory. Download the updated program of COMCTL32.DLL from the Microsoft

homepage,
or update the version of Windows

95.
2 User's Manual
2.1 Emulator User's Manual
In the E6000 emulator user's manual, some screen bitmap may be different from actual ones. For details on
functions, refer to the on-line help or Hitachi Debugging Interface User's Manual.
2.2 Execution Environment of the Tutorial Program
When the tutorial program is executed, after [E6000 H8S/2678 Emulator] is selected in the [Select Session]
dialog box and the HDI is started, select [Configure Platform...] from the [Setup] menu, and then set the
followings according to the Configuration dialog box to be displayed.
Option Set Value
Device H8S/2676
Mode 7 (On-Chip ROM, Single Chip)
Clock 12.5 MHz
Timer Resolution 125 ns
Others Default