Technical information

7
SEG1-SEG24, COM1-COM4:
WARNING
1. Always switch OFF the emulator product and user
system, before setting the switches. Failure to do so will
result in a FIRE HAZARD and will damage the user
system and emulator product or will result in PERSONAL
INJURY.
2. Before closing the cover of the emulator, be sure to
check that no foreign objects such as metal fractions are
left inside the emulator station.
In the H8S/2646, H8S/2282 series emulator, pins SEG1-SEG40 and COM1-COM4 are also used
for ports. Use the switches on the HS2646PWB61H board (inside the E6000 casing, installed on
the top) for setting. Before emulating a program using the H8S/2646, H8S/2282 series emulator,
set the switches according to table 2.1 through table 2.3. When using the H8S/2636, H8S/2638,
H8S/2639 series E6000 emulator, set all the switches (1 to 46) to pin 1.
Figure 2.6 Signal Select Switches