Technical information

1.3 Operating Voltage and Frequency Specifications

Table 1.5 shows examples of the MCU operating voltage and frequency specifications supported

by the E6000. If the E6000 is used in an environment that exceeds the operating voltage range and

operating frequency range guaranteed for the MCU operation, normal emulator operation is not

guaranteed.

Table 1.5 Operating Voltage and Frequency Specifications

MCU Types Operating Voltage (V)

Operating Frequency

(φ) (MHz)

H8S/2636, H8S/2638, H8S/2639

series

4.5-5.5 4-20

H8S/2646 series 4.5-5.5 4-20

H8S/2282 series 4.5-5.5 4-20

NOTE

For details on the operating voltage and frequency

specifications, refer to the MCU hardware manual.

In the E6000, the clock can be selected by using the Configuration window or the Clock

command.

Table 1.6 Clock Selections

Clock Command

Parameter

Configuration

Window Setting Notes

Main clock 32kHz* Main clock Subclock

32 kHz internal clock10 10MHz internal clock Default

20 20 MHz internal clock

t Target

t2 Target/2

Note: Specify 32kHz even when the subclock (32kHz) is not used.