Technical information

16
9) Test Keybreak
A) Key Break ........................................OK
Shows the check results
for the forced break
controlling circuits in
the E6000 (normal
completion).
10) Test Emulation RAM Hardware Break
A) GRD Break ........................................OK
B) WPT Break ........................................OK
C) WPT(ROM) Break ...................................OK
Shows the check results
for the illegal access
break controlling
circuits in the E6000
(normal completion).
11) Test Internal ROM Write-Protect
A) Write-Protect ....................................OK
Shows the check results
for the internal ROM
write-protection
controlling circuits in
the E6000 (normal
completion).
12) Test Hardware Break
A) Break Point Initialized ..........................OK
B) Event Detectors CES channel 1-12 .................OK
C) Test Sequencing 1 ................................OK
D) Check Range Break ................................OK
E) Range Break Test for Data ........................OK
F) Check Compare Either .............................OK
Shows the check results
for the hardware break
control circuits in the
E6000 (normal
completion).
13) Test Emulation RAM Trace
A) Free Trace .......................................OK
B) Range Trace ......................................OK
C) Point to Point Trace .............................OK
D) Start and Stop Event Trace .......................OK
E) Trace memory Overflow ............................OK
F) Time STAMP Trace (24 MHz) ........................OK
G) Time STAMP Trace (10 MHz) ........................OK
Shows the check results
for the trace controlling
circuits in the
E6000(normal
completion).
14) Test Runtime Counter
A) Runtime Counter (24.0 MHz) .......................OK
B) Runtime Counter (10.0 MHz) .......................OK
C) Runtime Counter (SUB:187.5 kHz) ..................OK
D) Runtime Counter (SUB:32.768 kHz) .................OK
Shows the check results
for the run-time counter
in the E6000 (normal
completion).