Technical information

13
The following messages are displayed during the test.
There are 19 steps in this test. The following
messages are displayed during the test.
Message Description
E6000 H8S/2628 Emulator Tests Vx.x
Copyright (c) 2002 Hitachi Ltd.
Test program
startTest program
start message. x.x
shows the version
number.
Option memory board fitted? ( 1. None 2. 1MB 3. 4MB ): 1
Enter 1 and press the
Enter key because the
SIMM memory module
is not installed in this
example.
Loading driver ...........................OK (Use PC Card)
Shows that driver
software has been
correctly loaded.
Initializing driver ....................................OK
Shows that driver
software has been
correctly initialized.
Searching for interface card ...........................OK
Shows that the PC
interface board is
correctly installed in the
host computer.
Checking emulator is connected .........................OK
Shows that the E6000 is
correctly connected to
the host computer.
Emulator board information:
Main board ID: H'5 Emulation board ID: H'0d
Shows the ID number of
the lower board of the
E6000 (always 5) and
the middle board of the
E6000 (always D).
SUB board ID: H'8
Shows the ID number of
the upper board of the
E6000 (always 8) and
whether the SIMM
memory board is
installed.