Technical information

10
4.3 I/O Modules
Table 4.3 lists the parameters for I/O module selection in the custom setting of the HDI Configuration
window.
Table 4.3 I/O Modules
HDI Parameter I/O Module
PWM14 MCU's 14-bit PWM.
D/A MCU's D/A.
TMR2-3 MCU's 8-bit timer (TMR2-3).
WDT1 MCU's WDT (WDT1).
IIC1 MCU's I2C bus (IIC1).
IIC0 MCU's I2C bus (IIC0).
IrDA MCU's IrDA.
DTC MCU's DTC.
TPU3-5 MCU's 16-bit timer pulse unit (TPU3-5).
MULT Set SCI0 and SCI1 to support the multiprocessor communication/smart card
interface. SCI2 is always enabled.
DMAC MCU's DMAC.
REFRESH MCU's refresh controller.
a/d (4 | 8) A/D converter. Four or eight data registers can be selected.
sci (1 | 2 | 3 | 4) Serial communication interface. The number of channels can be selected as
follows:
1: SCI0, 1
2: SCI0, 1, 2
3: SCI0, 1, 2, 3
4: SCI0, 1, 2, 3, 4