Technical information

2
Table 1.3 H8S/2615 Series MCU and User System Interface Cable
No.
MCU Type
Number Package E6000 User System Interface Cable
1 HD64F2615 80-pin QFP (FP-80Q) HS2615ECH61H
1.3 Operating Voltage and Frequency Specifications
Table 1.4 shows the MCU operating voltage and frequency specifications supported by the E6000. If
the E6000 is used in an environment that exceeds the operating voltage range and operating frequency
range guaranteed for the MCU operation, normal emulator operation is not guaranteed.
Table 1.4 Operating Voltage and Frequency Specifications
MCU Types Operating Voltage (V)
Operating Frequency
(φ
φφ
φ) (MHz)
H8S/2628, H8S/2615 series 4.5-5.5 4-24
NOTE
For details on the operating voltage and frequency
specifications, refer to the MCU hardware manual.
In the E6000, the clock can be selected by using the Configuration window or the Clock command.
Table 1.5 Clock Selections
Clock Command
Parameter
Configuration
Window Setting Notes
Main clock Main clock
10 10MHz internal clock Default
20 20 MHz internal clock
24 24 MHz internal clock
t Target
t2 Target/2