Technical information

1
Section 1 Overview
The H8S/2628, H8S/2615 series E6000 emulator (hereafter referred to as the E6000) is an efficient
software and hardware development support tool for application systems using Hitachi's original
microcomputers H8S/2628, H8S/2615 series.
1.1 Environment Conditions
Table 1.1 Environment Conditions
Item Specifications
Temperature Operating: +10 to +35°C
Storage: –10 to +50°C
Humidity Operating: 35 to 80% RH; no condensation
Storage: 35 to 80% RH; no condensation
Ambient gases No corrosive gases
AC Power supply voltage 100 V to 240 V AC ±5%
50/60 Hz
0.6 A max.
AC input cable* HS2628EPI61H
100 V-120 V (UL)
HS2628EPI61HB
200 V-240 V (BS)
User system voltage (UVcc) Depends on the target MCU within the range 4.5 V to 5.5 V
Note: HS2628EPI61H must be used at AC100 V-120 V input voltage.
HS2628EPI61HB must be used at AC200 V-240 V input voltage.
1.2 Supported MCUs and User System Interface Cables
Tables 1.2 to 1.5 show the correspondence between the MCUs and the user system interface cables
supported by the E6000.
Table 1.2 H8S/2628 Series MCU and User System Interface Cable
No.
MCU Type
Number Package E6000 User System Interface Cable
1 HD64F2628 100-pin QFP (FP-100M) HS2628ECH61H