Technical information

i
Preface
Thank you for purchasing the H8S/2628, H8S/2615 series E6000 emulator.
The H8S/2628, H8S/2615 series E6000 emulator (hereafter referred to as the E6000) was designed
as a software and hardware development tool for systems based on Hitachi's original
microcomputers HD64F2628 and HD64F2615.
The E6000 provides a CD-R that contains the Hitachi Debugging Interface (HDI) system program,
test program, and the user's manual.
There are three manuals for the E6000: the H8S series E6000 Emulator User's Manual, this
Supplementary Information, and the Hitachi Debugging Interface User's Manual. The E6000
Emulator User's Manual describes E6000 functions common to all H8S series microcomputers.
This Supplementary Information describes the functions specialized for each microcomputer
supported by the H8S/2628, H8S/2615 series E6000 emulator. Please read this manual before
using the E6000.
To connect the E6000 to the user system, a user system interface cable for each package type is
available. For details on the user system interface cable, refer to the User System Interface Cable
User's Manual.
The following shows the related manuals:
•
H8S Series E6000 Emulator User's Manual (HS2000EPI61HE)
•
Hitachi Debugging Interface User's Manual (HS6400DIIW5SE)
•
User System Interface Cable User's Manual (HS2628ECH61HE, HS2615ECH61HE)
•
The PC interface board user's manual which will be the following manuals:
USB Adapter User's Manual (HS6000EIU01HE)
PCI Bus Interface Board User's Manual (HS6000EIC01HE, HS6000EIC02HE)
PCMCIA Interface Card User's Manual (HS6000EIP01HE)
LAN Adapter (HS6000ELN01HE)
Note: Microsoft
®
, Windows
®
, and Windows NT
®
are registered trademarks of Microsoft
Corporation in the United States and/or in other countries.