Technical information

6.4 Module Hierarchical Structure
The module hierarchical structure is shown in Figure 6-2.
RESET_VECTOR (0x0000) Reset vector
⏐⎯startup (0x1000) Start
⏐⎯main Main processing
⏐⎯InitSCI SCI initial setting
⏐⎯RomMain ROM main processing
⏐⎯TransStart Transfer start
⏐ ⏐⎯RamCopy Copy
⏐⎯CmdFunc Command function
⏐ ⏐⎯Get Reception
⏐ ⏐⎯SendAck ACK transmission
⏐ ⏐ ⏐⎯Put Transmission
⏐ ⏐⎯ReferFunc Reference function
⏐ ⏐ ⏐⎯Put Transmission
⏐ ⏐⎯GetCmdData Command read
⏐ ⏐ ⏐⎯Get Reception
⏐ ⏐⎯SelectDevice Device selection
⏐ ⏐ ⏐⎯SendAck ACK transmission
⏐ ⏐ ⏐⎯ErrorCode Error code macro
⏐ ⏐ ⏐⎯Put Transmission
⏐ ⏐⎯SelectClockMode Clock mode selection
⏐ ⏐ ⏐⎯SendAck ACK transmission
⏐ ⏐ ⏐⎯ErrorCode Error code macro
⏐ ⏐ ⏐⎯Put Transmission
⏐ ⏐⎯SetNewBaudRate New bit rate setting
⏐ ⏐ ⏐⎯ErrorCode Error code macro
⏐ ⏐ ⏐⎯Put Transmission
⏐ ⏐ ⏐⎯cal_brr BRR calculation
⏐ ⏐ ⏐⎯SendAck ACK transmission
⏐ ⏐ ⏐⎯Get Reception
⏐ ⏐⎯RequestBootPrgSts Program status
⏐ ⏐ ⏐⎯Put Transmission
⏐ ⏐⎯Put Transmission
⏐⎯RamMain (0xFF4000) RAM main processing
(To be continued)
Figure 6-2 Module Hierarchical Structure (1)
77