Technical information

19
C)PERM_SUBROUTINE Time Measure Test .........OK
(normal completion).
D)PERM Time Out Bit Test
Time Out Test 1............................OK
Time Out Test 2............................OK
17) Testing Bus Monitor :
Shows the check results
Setting up, please wait..
for the bus monitor
A) Register test.............................OK
controlling circuits in the
B) Parallel RAM test.........................OK
E6000 (normal
C) SPRSEL2 test..............................OK
completion).
Setting up, please wait..
D) RAM monitor test..........................OK
18) Testing Parallel Access :
Shows the check results
A)IN ROM Parallel Read Access(WORD) .........OK
for the parallel access
B)IN ROM Parallel Write Access(WORD) ........OK
controlling circuits in the
C)IN ROM Parallel Write Access(High Byte) ...OK
E6000 (normal
D)IN ROM Parallel Write Access(Low Byte) ....OK
completion).
E)IN RAM Parallel Read Access(WORD) .........OK
F)IN RAM Parallel Write Access(WORD) ........OK
G)IN RAM Parallel Write Access(High Byte) ...OK
H)IN RAM Parallel Write Access(Low Byte) ....OK
I)SIMM Parallel Read Access(WORD) ...........SKIP
J)SIMM Parallel Write Access(WORD) ..........SKIP
K)SIMM Parallel Write Access(High Byte) .....SKIP
L)SIMM Parallel Write Access(Low Byte) ......SKIP
0 total errors
Total number of errors.
Tests passed, emulator functioning correctly
Shows that the E6000 is
correctly operating.
When S is added to the command line, step 1 will be executed again after step 18.