Technical information

15
It will take about 6 minutes to execute the test program when the host computer using
Windows
®
98 runs at 166 MHz and the PCI interface board is used. There are 18 steps in this test.
The following messages are displayed during the test.
Message Description
E6000 H8S/2339 EMULATION BOARD Tests Vx.x
Test program start
Hitachi Ltd (2000)
message. Vx.x shows
the version number.
SIMM module fitted? (1.None 2.1MB 3. 4MB) 1
Enter 1 because the
SIMM memory module is
not installed in this
example.
Searching for interface card ........OK, card at H'd0000
Shows that the PC
interface board is
correctly installed in
the host computer and
displays the address
assigned to the board.
The displayed address
depends on the
settings.
Checking emulator is connected ......OK
Shows that the E6000 is
correctly connected to
the host computer.
Emulator Board Information:
Shows the ID number of
Main Board ID H'5
the lower board of the
E6000 (always 5).
Emulation Board ID H'16
Shows the ID number of
the upper board of the
E6000 (always H

16).
Revision H'x
Shows the revision number
of the upper board of the
E6000.
SIMM No SIMM module inserted
Shows whether the SIMM
memory board is
installed.