Technical information

8
AN0 to AN7, AN12 to AN15, DA0 to DA3, AVcc, AVss, and Vref:
AN0 to AN7, AN12 to AN15, DA0 to DA3, AVcc, AVss, and Vref:AN0 to AN7, AN12 to AN15, DA0 to DA3, AVcc, AVss, and Vref:
AN0 to AN7, AN12 to AN15, DA0 to DA3, AVcc, AVss, and Vref:
Figure 2.4 User System Interface Circuit for AN0 to AN7, AN12 to AN15, DA0 to DA3,
AVcc, AVss, and Vref Signals
IRQ0IRQ7 and WAIT: The IRQ0 to IRQ7 and WAIT signals are input to the MCU and also
to the trace acquiring circuit. Therefore, the rising and falling time of these signals must be within
8 ns/V or shorter.
In the MCU, the terminals for inputting the IRQ4-IRQ7 and WAIT signals can be selected by the
register setting. In the E6000, select them by the switch on the user system interface cable (only
for the 144-pin version of the H8S/2338 series). For details, refer to the user system interface
cable user's manual.
Figure 2.5 IRQ0IRQ7 and WAIT User System Interface Circuit