Technical information

VI
WARNING
Observe the precautions listed below. Failure to do so
Observe the precautions listed below. Failure to do soObserve the precautions listed below. Failure to do so
Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the user
will result in a FIRE HAZARD and will damage the userwill result in a FIRE HAZARD and will damage the user
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
system and the emulator product or will result insystem and the emulator product or will result in
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
PERSONAL INJURY. The USER PROGRAM will bePERSONAL INJURY. The USER PROGRAM will be
PERSONAL INJURY. The USER PROGRAM will be
LOST.
LOST.LOST.
LOST.
1.
1.1.
1. Do not repair or remodel the emulator product by
Do not repair or remodel the emulator product byDo not repair or remodel the emulator product by
Do not repair or remodel the emulator product by
yourself for electric shock prevention and quality
yourself for electric shock prevention and qualityyourself for electric shock prevention and quality
yourself for electric shock prevention and quality
assurance.
assurance.assurance.
assurance.
2.
2.2.
2. Always switch OFF the E6000 emulator and user system
Always switch OFF the E6000 emulator and user system Always switch OFF the E6000 emulator and user system
Always switch OFF the E6000 emulator and user system
before connecting or disconnecting any CABLES or
before connecting or disconnecting any CABLES orbefore connecting or disconnecting any CABLES or
before connecting or disconnecting any CABLES or
PARTS.
PARTS.PARTS.
PARTS.
3.
3.3.
3. Always before connecting any CABLES, make sure that
Always before connecting any CABLES, make sure that Always before connecting any CABLES, make sure that
Always before connecting any CABLES, make sure that
pin 1 on both sides are correctly aligned.
pin 1 on both sides are correctly aligned.pin 1 on both sides are correctly aligned.
pin 1 on both sides are correctly aligned.
4.
4.4.
4. Supply
SupplySupply
Supply power according to the power specifications and
power according to the power specifications and power according to the power specifications and
power according to the power specifications and
do not apply an incorrect power voltage. Use only the
do not apply an incorrect power voltage. Use only thedo not apply an incorrect power voltage. Use only the
do not apply an incorrect power voltage. Use only the
provided power cable.
provided power cable.provided power cable.
provided power cable.