User`s manual

212
04) Testing Trace memory :
A) Decode Test page [H'000 - H'04f] (Lower 32 K) ...OK
B) Marching Test page [H'000 - H'04f] (Lower 32 K) ...OK
C) Decode Test page [H'000 - H'04f] (Upper 32 K) ...OK
D) Marching Test page [H'000 - H'04f] (Upper 32 K) ...OK
Shows the results of
decoding test and
marching test for the
firmware RAM in the E6000
(normal completion).
05) Testing Map control memory :
A) Decode Test page [H'200 - H'27f] ...OK
B) Marching Test page [H'200 - H'27f] ...OK
Shows the results of
decoding test and
marching test for the
mapping RAM in the E6000
(normal completion).
06) Testing Internal ROM and RAM :
A) Decode Test (Internal ROM) .....OK
B) Marching Test (Internal ROM) ...OK
C) Decode Test (Internal RAM) .....OK
D) Marching Test (Internal RAM) ...OK
Shows the results of
decoding test and
marching test for
internal ROM and RAM in
the E6000 (normal
completion).
07) Testing Option RAM :
No option memory board fitted – test skipped
Shows the check results
for the SIMM memory
module (not installed).
08) Testing Emulation RAM STEP Operation :
A) Step Operation .................OK
Shows the check results
for the step execution
controlling circuits in
the E6000 (normal
completion).
09) Testing Keybreak :
A) Key Break ......................OK
Shows the check results
for the forced break
controlling circuits in
the E6000 (normal
completion).
10) Testing Emulation RAM Hardware Break :
A) GRD Break ......................OK
B) WPT Break ......................OK
C) WPT (ROM) Break ................OK
Shows the check results
for the illegal access
break controlling
circuits in the E6000
(normal completion).
11) Testing Internal ROM Write-Protect :
A) Write-Protect .......................OK
Shows the check results
for the internal ROM
write-protection
controlling circuits in
the E6000 (normal
completion).
12) Testing Hardware Break :
A) Break Point Initialized .............OK
B) Event Detectors CES channel 1-12 ....OK
C) Test Sequencing 1 ...................OK
D) Check Range Break ...................OK
E) Range Break Test for Data ...........OK
F) Check Compare Either ................OK
Shows the check results
for the hardware break
control circuits in the
E6000 (normal
completion).