User`s manual

183
Table 8.2 Environment for the H8S/2214 E6000 Emulator CPU 2000 Debugging Platform
[Device]
Option
[Mode] Option [Clock] Option Expansion
Hardware
Custom The MCU previously selected
H8S/2214 Main: 10 MHz
Main: 20 MHz
Main: Target
Main: Target/2
None
H8S/2277 HS2276EIO61H
(FLEX™ decoder
board)
H8S/2277R
Main: 10 MHz, Sub: Target
Main: Target, Sub: Target
Main: Target/2, Sub: Target
HS2276REIO61H
(FLEX™ decoder
board)
H8S/2215
H8S/2215A
H8S/2215B
H8S/2215C
Main: 10 MHz
Main: Target
Main: Target/2
HS2215ECN61H
(user cable) or
HS2215ECB62H
(user cable)
H8S/2215R HS2214EPI61H:
Main: 20 MHz
Main: Target
Main: Target/2
HS2214EPI62H:
Main: 20 MHz
Main: 24 MHz
Main: Target
Main: Target/2
HS2215RECN61H
(user cable) or
HS2215RECB62H
(user cable)
H8S/2239
4 (advanced mode, 16bit Bus)
5 (advanced mode, 8bit Bus)
6 (advanced mode, on-chip ROM)
7 (advanced mode, single chip)
Target
Main: 10 MHz, Sub: 32 kHz
Main: 20 MHz, Sub: 32 kHz
Main: 10 MHz, Sub: Target
Main: 20 MHz, Sub: Target
Main: Target, Sub: Target
Main: Target/2, Sub: Target
None
H8S/2218
H8S/2217
4 (advanced mode, 16bit Bus)
5 (advanced mode, 8bit Bus)
6 (advanced mode, on-chip ROM)
Target
HS2218ECN61H
(user cable) or
HS2218ECB62H
(user cable)
H8S/2212
H8S/2211
H8S/2210
7 (advanced mode, single chip)
Target
HS2214EPI61H:
Main: 10 MHz,
Sub: 32 kHz
Main: 20 MHz,
Sub: 32 kHz
Main: 10 MHz,
Sub: Target
Main: 20 MHz,
Sub: Target
Main: Target,
Sub: Target
Main: Target/2,
Sub: Target
HS2214EPI62H:
Main: 10 MHz,
Sub: 32 kHz
Main: 20 MHz,
Sub: 32 kHz
Main: 24 MHz,
Sub: 32 kHz
Main: 10 MHz,
Sub: Target
Main: 20 MHz,
Sub: Target
Main: 24 MHz,
Sub: Target
Main: Target,
Sub: Target
Main: Target/2,
Sub: Target
HS2212ECH61H
(user cable)
Notes: 1. Target in [Mode] is only available when the target system is connected.
2. Target and Target/2 in [Clock] are only available when the target system is connected.
3. When emulating the H8S/2214, H8S/2215, or H8S/2239 group, the maximum operating
frequency of the actual MCU is 16 MHz.
4. When emulating the H8S/2276 group, the maximum operating frequency of the actual MCU is
13.5 MHz.
5. When emulating the H8S/2218, the H8S/2212 or the H8S/2215R group, the content of [Clock]
varies according to the emulator in use (HS2214EPI61H or HS2214EPI62H).
6. FLEX
TM
is a trademark of Motorola, Inc.