To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.
Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office.
To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.) Accordingly, although Hitachi, Hitachi, Ltd.
Cautions Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
User’s Manual H8S/2276 Series Expansion I/O Board (HS2276EIO61H) for E6000 Emulator User’s Manual Rev.1.0 2002.
Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice.
IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. Emulator Product: Throughout this document, the term "emulator product" shall be defined as the following products produced only by Hitachi, Ltd. excluding all subsidiary products.
LIMITED WARRANTY Hitachi warrants its emulator products to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Hitachi, at its option, will repair or replace any emulator products returned intact to the factory, transportation charges prepaid, which Hitachi, upon inspection, determine to be defective in material and/or workmanship. The foregoing shall constitute the sole remedy for any breach of Hitachi's warranty.
State Law: Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which may vary from state to state.
SAFETY PAGE READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. DEFINITION OF SIGNAL WORDS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
WARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product by yourself for electric shock prevention and quality assurance. 2. Always switch OFF the E6000 emulator and user system before connecting or disconnecting any CABLES or PARTS. 3.
Preface Thank you for purchasing this H8S/2276 series expansion I/O board (HS2276EIO61H; hereinafter referred to as the expansion I/O board) for the H8S/2214 series E6000 emulator. The expansion I/O board enables user systems for Hitachi's original microcomputer H8S/2276 series to be developed using an H8S/2214 series E6000 emulator (HS2214EPI61H; hereinafter referred to as the emulator).
Contents Section 1 1.1 1.2 1.3 1.4 Overview ..........................................................................................1 Environment Conditions.................................................................................................... 1 Supported MCUs and User System Interface Cables ........................................................ 2 Operating Voltage and Frequency Specifications ............................................................. 2 Components ...................
Section 1 Overview The H8S/2276 series E6000 expansion I/O board (hereinafter referred to as the expansion I/O board) is an efficient software and hardware development support tool for application systems using Hitachi's original microcomputer H8S/2276 series FLEX decoder interface. The expansion I/O board should be used with H8S/2214 series E6000 emulator (HS2214EPI61H: hereinafter referred to as the emulator). HDI HS2214EPI61SR V1.01 or later is necessary.
1.2 Supported MCUs and User System Interface Cables Table 1.2 shows the correspondence between the MCUs and the user system interface cables supported by the E6000. Table 1.2 H8S/2276 series MCU and User System Interface Cable No. MCU Type Number Package E6000 User System Interface Cables 1 HD64F2277 TFP-100B HS2276ECH61H TFP-100G HS2276ECN61H 1.3 Operating Voltage and Frequency Specifications Table 1.3 shows the MCU operating voltage and frequency specifications supported by the E6000.
1.4 Components Figure 1.1 shows the HS2276EIO61H expansion I/O board appearance, and table 1.4 lists the components of the expansion I/O board. Please make sure you have all of these components when unpacking. Figure 1.1 HS2276EIO61H Expansion I/O Board Table 1.4 HS2276EIO61H Components No.
Section 2 Connection Procedures WARNING Always switch OFF the user system and the emulator product before the EXPANSION I/O BOARD or USER SYSTEM INTERFACE CABLE is connected to or removed from any part. Before connecting, make sure that pin 1 on each side is correctly aligned. Failure to do so will result in a FIRE HAZARD and will damage the user system, the emulator product, the user system interface cable, and the expansion board, or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 2.
2.2 Using Emulator with Connecting User System through User System Interface Cable CAUTION When connecting or removing the user system interface cable, apply force only in the direction suitable for connection or removal, while making sure not to bend or twist the cable or connectors. Otherwise, the cables or connectors will be damaged. 1. Make sure the emulator and the user system are turned off. 2.
Section 3 Interface Protection circuits, are provided for the H8S/2276 series FLEX decoder interface of the expansion I/O board. Signals are connected to the user system interface cable with the protection circuit. Figure 3.1 shows the FLEX decoder interface signals which are S7 to S0, LOBAT, EXTS1 to 0, SYMCLK, and CLKOUT. HS2276EIO61H H8S/2276 Vcc 47k 47 User system interface cable S7 to S0, LOBAT, EXTS1 to 0, SYMCLK, CLKOUT Figure 3.
Section 4 Setting Operating Clock 4.1 Subclock (OSC2, 1) When the switch is set on the expansion I/O board (Subclock selection) and jumper P4 is set on the user system interface cable, subclocks in table 4.1 can be selected. Select Target in the Configuration window. (Figure 4.1, Figure 4.2) Table 4.1 Setting Subclock Expansion I/O Board (Subclock selection) User System Interface Cable (P4) 160 kHz 1-2 connected 76.8 kHz Subclock (ØSUB) 160 kHz 76.
Figure 4.
Section 5 Notice WARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. This expansion I/O board is specifically designed for the HS2214EPI60H. Do not use this expansion I/O board with any other emulator station. 2. Use the H8S/2276 series user system interface cable (HS2276ECH61H or HS2276ECN61H).
