Manualshelf

Technical information

ManualsBrandsRenesas ManualsComputer equipmentH8S/2158
12345678910
2
1. Connecting the E10A Emulator with the User system
To connect the E10A emulator (hereafter referred to as emulator), an H-UDI port connector must
be installed on the user system to connect the user system interface cable. When designing the
user system, refer to the recommended circuit between the H-UDI port connector and the MCU.
Before designing the user system, be sure to read the H8S/2158F E10A user’s manual and the
hardware manual of the related MCU.